Removes Biofilm & pathogens from all surfaces & hard to reach areas of pipework and within spas and whirlpool baths.
Quick & easy to use, 100 times more effective in removal of biofilm than Chlorine - Cleans and disinfects.
How does it work?
Warm hot tub water can provide the ideal breeding ground for bacterial growth. As this begins to attach to spa pipework and surfaces, biofilm can begin to form.
Biofilm is extremely resistant against chlorine and can harbour bacteria and other pathogens.
Pure-Spa Super Cleanse Biofilm Eliminator Tablets are a highly effective cleansing agent that penetrates the biofilm and helps remove bacteria.
Each tablet generates a Chlorine Dioxide soluble gas which has the advantage that it penetrates through the biofilm and removes it. Chlorine alone cant do that because the chlorine must oxidise through the biofilm first. These tablets are about 100 times more effective in the removal of biofilm than chlorine.
Not recommended for use in inflatable Spas.
Please Note: The packet may be supplied unbranded. Gloves are included
How to use
Usage guide: 1 x 20g tablet for a Spa or Hot Tub
Apply 1 tablet per 500 - 1000 litres of spa water prior to draining (domestic).
Warm hot tub water can provide the ideal breeding ground for bacterial growth. As this begins to attach to spa pipework and surfaces, biofilm can begin to form. Biofilm is extremely resistant against chlorine and can harbour bacteria and other pathogens. Biofilm Eliminator Tablets are a highly effective cleansing agent that penetrates the biofilm and helps remove bacteria.
Application Instructions
1. Remove and thoroughly clean cartridge filters before returning to service.
2. Ensure free chlorine or total bromine levels are within the recommended range of 3 - 5mg/l (ppm).
3. Only use Biofilm Eliminator tablets prior to draining down your hot tub.
4. Caution: Do not use hot tub during treatment.
5. Remove any soft head rests that may be fitted.
6. Isolate any chlorine or bromine feeder prior to Biofilm treatment.
7. Wear protective gloves and eye protection when handling the product.
8. DO NOT touch tablets or allow them to get wet prior to adding to the hot tub water.
9. Use scissors to cut open the sachet(s) and carefully drop the required number of tablets around the pool or spa perimeter with the pump(s) running.
10. Leave the deep clean treatment for 60 minutes with the pump(s) running. After treatment, turn the pump(s) off and drain all the water to waste.
11. Refill with fresh water and return hot tub water to recommended chemical levels.
Each sachet contains 1 x 20g tablet.
Warning: Remaining sachets should be stored in the original packaging with the lid tightly sealed.
Store in cool, dry conditions.
Handle product in a well ventilated area, preferably outdoors.
Ensure lid is replaced after use.
Ensure chemicals do not become damp in storage.
Wash hands after use
SEE MSDS sheet in the downloads for more info
