The Airbath Genesis range of blowers made by HydroAir are easily identified by their distinctive blue or blue & white casing. They are used by many hot tub manufactures but will more commonly be found as the blower of choice in many whirlpool baths out there.
- 500W version - Used primarily with whirlpool baths & small hot tubs or spas, Very common in baths by Airbath International
- 700W version - Used primarily with whirlpool baths & small hot tubs or spas, Very common in baths by Airbath International
- 500W heated. Replaces Airbath hot water injection system
- This version is used to replace the air blower in an Airbath that have MULTIPLE cables going to it
- It is NOT compatible with Airbath blowers that have only ONE cable going to the blower
- This version HAS an internal PCB (printed circut board). The PCB allows you to connect your Airbath touch pad directly into the top of the blower. This would be how your current blower is controlled.
Old/New wire colour description
|
Older Air Bath Touch Pad Wire Colours |
Terminal No. |
New Touch Pad Wire Colours |
Function |
|
Red |
1 |
Grey |
Blower On/Off |
|
Green |
2 |
Black |
Massage Mode |
|
Blue |
3 |
Blue |
Variable Speed |
|
Black |
4 |
Yellow |
LED on/off |
|
Yellow |
5 |
Not Used |
N/A |
|
White |
6 |
Red |
Ground |
