Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml

Moosgrun (Mossgreen) 740

LID: 1701

cramer

50ml

easy-to-use

acid free

£18.49 Inc VAT

SKU: 4660

MPN: 4660

1 In StockSame day dispatch if ordered by 14:00

QTY

Find a retailer

Compare Product Ask us a Question

Fast UK Delivery

Next working day from £8.50 Standard from £4.50 or FREE if you spend £60

Trade Prices Available

Request your trade account

Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml Moosgrun 740
For covering repairs & unsightly marks on Acrylic, Enamel, Ceramic, Fibreglass and Resin Stone surfaces.

For professional and cost-saving repairs when ease and perfect results are important.

Each Cramer Repair Spray can be used to cover repairs on:

Acrylic (Baths)
Enamel (Steel/Cast Baths)
Ceramic (Sanitaryware)
Fibreglass (Baths)
Resin Stone (Shower Trays

If you require a colour not shown have a look at the Cramer Colour Card under downloads to see available colours. Colours can be ordered in on request.

DELIVERY RESTRICTIONS & SURCHARGE
We cannot ship this item to Highlands & Islands or International addresses.
The item contains an Aerosol which is prohibited by Royal Mail, most standard Couriers & Air Mail services.
We can only deliver to UK mainland addresses via specialist carrier, therefore a £3.50 additional delivery surcharge will be applied at checkout.

Downloads & Articles

Cramer Colour Card DOWNLOAD

More Info

Easy to use to cover repairs & unsightly marks.

Clean area thoroughly before you start
Shake can vigorously for 3 mins
Spray a sample area first ( min working temperature 20c /64f )
Apply the spray thinly from a distance of 15 - 20 cm

Tip:
Even coverage is easier to achieve if you use a mask cut from paper, just cut to size of area being sprayed. For larger areas mask surrounding area.
Hold the mask about 1 - 2 cm in front of the damaged area and start spraying onto the mask, before directing the spray with light movements over the cut out area.
Wait one minute and apply the next coat. Repeat this process until the damaged area has been completely covered. To remove drips or runs you can use Acetone ( follow manufactures instructions )
The repaired area can be polished with either Email Star or Acryl star polish after four days.